Cisco IOS - Network Address Translation (NAT)

by
Jeremy Canfield |
Updated: January 20 2021
| Cisco IOS articles
Simply put, network address translation (nat) converts a private IP address such as 10.14.115.25 to a public IP address. Typically, network address translation is done by a router or modem on the edge of your network for traffic between an external system (e.g. from the Internet) and your internal private network.
Use the show ip nat translations to view the NAT table in IOS.
R1> enable
R1# show ip nat translations
. . .
Did you find this article helpful?
If so, consider buying me a coffee over at